花粉管通道法转基因抗虫棉外源基因的整合方式

对花粉管通道法培育的转Bt基因抗虫棉GK19、GK22、1016、1018、1022、1025、GK5、GKsu12和SGK1进行Southern杂交分析。结果表明,目的基因能够完整整合到基因组里,HindⅢ酶切位点有可能发生甲基化或丢失。除1018以外的上述8个抗虫棉的分析结果还表明,载体骨架没有整合到棉花基因组中。     

果树自交不亲和性的遗传与生理机制及其研究

在简要介绍植物（包括果树）自交不亲和性与生理控制机制的基础上，着重对梨、苹果、杏等果树自交不亲和性的研究进行了综述，内容包括花柱内花粉管生长特点、花柱S糖蛋白的特性与作用机理以及果树自交不亲和的分子生物学研究，并提出了该领域有待研究的问题。     

Capnographic documentation of nasoesophageal and nasogastric feeding tube placement in dogs

Objective: To evaluate the ability of capnography to document proper placement of nasoesophageal (NE) and nasogastric (NG) feeding tubes. This study was conducted in 3 phases. Phase I of this study was designed in order to test the efficacy of capnography to distinguish placement of a feeding tube in the alimentary tract versus the respiratory tract. Phase II was designed in order to document that carbon dioxide (CO₂) could be measured through a polyvinyl chloride (PVC) feeding tube. Phase III was performed in order to evaluate the technique of continuous monitoring during insertion of the feeding tube into the esophagus and stomach as would be performed during a clinical‐tube placement. Design: Prospective study. Setting: Research laboratory. Animals: 24 adult dogs. Interventions: In Phase I, sedated dogs were instrumented with an intratracheal catheter and an 8 French feeding tube placed nasally into the distal esophagus and later advanced into the stomach. In Phase II, dogs were anesthetized and an 8 French feeding tube was placed down the endotracheal tube, then into the esophagus and later advanced into the stomach. In Phase III, sedated dogs were instrumented with an 8 French feeding tube inserted intranasally and then advanced to the level of the nasopharynx, distal esophagus and, lastly, the stomach. Fluoroscopy was used in order to determine location of the feeding tube. Measurements and main results: Phase I measurements included respiratory rate and CO₂ from the trachea, esophagus, and stomach and pH of gastric fluid sample. Phase II measurements included respiratory rate and CO₂ from the endotracheal tube, feeding tube in the endotracheal tube, feeding tube in the distal esophagus, and feeding tube in the stomach. Phase III data collection included respiratory rate and CO₂ as the tube was passed through the nasal cavity, nasopharynx, esophagus and stomach. Phase I fluid samples were collected from 5 of the 9 dogs and had pH values from 1.68 to 4.20. In both phases, values for the respiratory rate and CO₂ from the esophagus and stomach were 0 ± 0, significantly lower (P < 0.001) than the values from the trachea. In Phase II, there was no significant difference between the respiratory rates (P = 0.886) and CO₂ (P = 0.705) readings obtained from the endotracheal tube compared to readings from the feeding tube in the endotracheal tube. In Phase III, there was a significant difference (P < 0.001) between the respiratory rates and CO₂ readings obtained from the nasal cavity and the nasopharynx when compared to those readings obtained from the esophagus and stomach. Measurement of CO₂ and respiratory rate resulted in a reading of 0 every time the feeding tube was in the esophagus or stomach. Conclusions: Capnography may be used in order to detect airway placement of NE and NG tubes.     

钢管混凝土拱桥的施工监控技术

钢管混凝土是由混凝土填入薄壁钢管而形成的一种组合材料。在桥梁结构上,钢管混凝土主要应用于拱桥。目前,大跨度钢管混凝土拱桥主要采用缆索吊装-斜拉扣定施工新技术,拱桥的线形通过实测每节钢管拱的标高及拱轴线位置,并借助扣索实施动态调整来保证。为此,介绍了钢管混凝土拱桥施工过程的监控技术,从而指导施工,以确保拱桥建成后满足设计要求。     

苹果自花授粉的花粉管结构变化及S-RNase定位

 苹果‘红星’品种授粉处理24 h后, 自花授粉比异花授粉的花粉管生长缓慢。授粉处理48 h后, 可观察到自花授粉花柱通道组织的花粉管内有二裂粒子增加、管壁破裂和管内物质溢出、外层管壁增厚等现象。苹果气球状花期未授粉的花柱及自花和异花授粉24 h后且无花粉管存在的花柱切片显示, S-RNase位于花柱通道组织的细胞内。自花和异花授粉48 h后有花粉管通过的花柱切片显示, S-RNase位于花柱通道组织的细胞间隙和花粉管内。     

香菇烂筒病因与综合防治研究

本文通过对香菇烂筒重灾区进行生态环境、气象、植保等方面调查，应用微生物分离技术，对烂筒样品和土壤样品进行致烂菌的分离、筛选和回接试验，从中确定致烂菌菌株的分类地位和基本生物学特性，从而研制防治香菇烂筒的生态、物理和药物防治技术，提出综合治理措施。     

卧式泵站直管式出水流道型线变化水力性能数值模拟

基于不可压缩流体的连续性方程和雷诺时均N-S方程,采用CFD技术对卧式泵站直管式出水流道进行数值模拟计算,通过改变出水流道型线,分析出水流道内部流动特性及水力损失影响。研究表明,出水流道当断面形状设计为圆变方,在平面方向和立面方向均逐渐扩大的形式时,流道内流态最好;将进水流道断面在平面方向设计为先扩散后平直,而在立面方向均匀扩大的形式时,流态较好;而将断面在立面与平面方向均设计成先扩散后平直时,出水流道流态最差。     

不同叶顶间隙下斜流泵内部 流动特性的数值模拟

为研究轮缘叶顶间隙对斜流泵性能和流动不稳定特性的影响,基于SST k-ω湍流模型对某斜流泵选取了0, 0.25, 1.00, 2.00 mm 4种尺寸的叶顶间隙进行数值计算,分析间隙区域内压差分布、泄漏量、叶顶泄漏涡旋强度以及进口轴面速度分布.结果表明:不同运行工况下,斜流泵泄漏量从叶轮进口到叶轮出口先增大后减小,其与间隙区内压差变化趋势相吻合.叶顶泄漏量随着间隙尺寸的增大而增大,导致泵的能量损失增大.经对比发现,间隙尺寸是影响叶顶泄漏量的主要因素.小流量工况下,随着叶顶间隙尺寸的增大,叶顶泄漏流与主流卷吸作用形成的泄漏涡强度逐渐增强.部分泄漏流进入相邻叶片通道,导致其流动失稳.随着叶顶间隙的增大,斜流泵能量损失明显增多,且内流不稳定性明显加剧.增大流量后,不同间隙下叶顶泄漏涡旋转强度均逐渐降低.     

早胜牛的采精及细管冻精制作技术要点

近年来，伴随我国畜牧业蓬勃发展的同时，为了更大限度的提高母畜的受胎率和充分利用优秀种畜的基因，人工授精技术得到了不断完善和发展，并在全国各地广泛推广和应用。本文结合实践经验总结出的一些技术措施，阐述了对早胜牛这一地方优良种质资源进行保种和开发利用的重要意义，同时指出人工授精技术和低温冷冻保存精液技术在早胜牛上的实践，对于进一步开发利用培育优质高产肉牛新品种，促进肉牛产业高质量发展具有非常重要的现实意义。通过早胜牛种公牛采精的全过程以及细管冻精制作要点的详细讲解，低温冷冻保存精液技术，可更经济、可靠地实现家畜品种资源的保护，让优良基因长时间保存使得后续研究需要得到保障。